SAE Standard Clevis Pins
A versatile and economical fastener manufactured to standard SAE dimensions.
ITW Bee Leitzke pins are cold-formed for strength from low-carbon (1010-1018)
steel.
Product Code
|
11-SAE1 |
11-SAE3 |
11-SAE5 |
11-SAE7 |
11-SAE9 |
11-SAE11 |
11-SAE13 |
11-SAE15 |
11-SAE17 |
Nominal Size or Basic Pin Diam.
|
3/16" |
1/4" |
5/16" |
3/8" |
7/16" |
1/2" |
5/8" |
3/4" |
7/8" |
A Shank Diam.
|
0.186/0.181 |
0.248/0.243 |
0.311/0.306 |
0.373/0.368 |
0.436/0.431 |
0.496/0.491 |
0.621/0.616 |
0.746/0.741 |
0.871/0.866 |
B Head Diam.
|
0.32/0.30 |
0.38/0.36 |
0.44/0.42 |
0.51/0.49 |
0.57/0.55 |
0.63/0.61 |
0.82/0.80 |
0.94/0.92 |
1.04/1.02 |
C Head Height
|
0.07/0.05 |
0.10/0.08 |
0.10/0.08 |
0.13/0.11 |
0.16/0.14 |
0.16/0.14 |
0.21/0.19 |
0.26/0.24 |
0.32/0.30 |
D Head Chamfer (+0.01)
|
0.02 |
0.03 |
0.03 |
0.03 |
0.04 |
0.04 |
0.06 |
0.07 |
0.09 |
E Hole Diam.
|
0.088/0.073 |
0.088/0.073 |
0.119/0.104 |
0.119/0.104 |
0.119/0.104 |
0.151/0.136 |
0.151/0.136 |
0.182/0.167 |
0.182/0.167 |
F Point Diam.
|
0.15/0.14 |
0.21/0.20 |
0.26/0.25 |
0.33/0.32 |
0.39/0.38 |
0.44/0.43 |
0.56/0.55 |
0.68/0.67 |
0.80/0.79 |
G Pin Length Basic
|
0.58 |
0.77 |
0.94 |
1.06 |
1.19 |
1.36 |
1.61 |
1.91 |
2.16 |
H Head to Center of Hole
|
0.504/0.484 |
0.692/0.672 |
0.832/0.812 |
0.958/0.938 |
1.082/1.062 |
1.223/1.203 |
1.473/1.453 |
1.739/1.719 |
1.989/1.969 |
J End to Center Ref Basic
|
0.09 |
0.09 |
0.12 |
0.12 |
0.12 |
0.15 |
0.15 |
0.18 |
0.18 |
K Head to Edge of Hole Ref
|
0.548/0.520 |
0.763/0.708 |
0.892/0.864 |
1.018/0.990 |
1.142/1.114 |
1.298/1.271 |
1.548/1.521 |
1.830/1.802 |
2.08/2.052 |
L Point Length
|
0.055/0.035 |
0.055/0.035 |
0.071/0.049 |
0.071/0.049 |
0.071/0.049 |
0.089/0.063 |
0.089/0.063 |
0.110/0.076 |
0.110/0.076 |
Recommended Cotter Pin Nominal Size
|
1/16 0.062 |
1/16 0.062 |
3/32 0.093 |
3/32 0.093 |
3/32 0.093 |
1/8 0.125 |
1/8 0.125 |
5/32 0.156 |
5/32 0.156 |
Notes:
- Lengths tabulated are intended for use with standard clevises, without
spacers. When required, it is recommended that other pin lengths be
limited wherever possible to nominal lengths in 0.06 in. increments.
- Basic "J" dimension (distance from centerline of hole to end of pin)
is specified for calculating hole location from underside of head on
pins of lengths not tabulated.
|
Cotter Pins Hairpin Cotters (Bridge Pins) Haripin Clips Safety Pins 
Standard Machinery Keys Woodruff Keys Keyed Shafting Mak-A-Key 
Type A, Type B, Type C & E, Type D & F 
